2023 Live Bees Now Available for pre-order or registration

Getting Ready To Assemble Hives

March 31, 2020 1 Comment

Getting Ready To Assemble Hives

It’s spring…but in northern Alberta, we are still waiting patiently for it to start! Some people are spring feeding already, but here, we are still waiting for warmer weather and highs of at least 5°C.

So while you wait to get started this season, it’s a good time to take online courses, assemble frames or replace any equipment you may need for the 2020 season. It’s also a good time to paint your boxes or finish them in any way you want.

Tips For Assembling Your Hive

For those of you who are feeling rusty or are new to beekeeping (congrats!), here are some tips on assembling your hive(s) this spring. 

First off, make sure you choose a good spot for your hive. Two important things to consider when choosing a spot: 1. You need an area that gets sun 2. make sure it’s sheltered from the northwest wind.

Spring hive assembly: You only need the hive stand, bottom board, 1 brood box (with frames), inner cover and the telescoping lid. That's all the items you need to begin in the spring. This is what you would add your nuc frames to.

Complete hive assembly for main flow: Assembled from bottom to top: Hive stand, bottom board and entrance reducer, brood boxes, queen excluder, auto-extract super or other honey collecting boxes, inner cover, ventilation box and telescoping lid.

Check out our Parts of A Hive info sheet and How To Assemble Your Hive video.

Why do you need a hive stand? 

There are two reasons to use a hive stand:

1. It keeps the bottom of the hive away from water and the ground so that it doesn’t rot.

2. Raising the hive also makes it easier for you to check on your hive without having to bend over too much.

 

Entrance reducers are recommended for spring and fall. 

Entrance reducers keep other critters out, while also helping the bees defend the their hive by having a smaller entrance for enemies to get in (like wasps).

 

Queen Excluders 

Queen excluders are important to use during the beekeeping season. They help you keep your queen out of the honey box so you don’t accidentally squish her on inspecting or removing honey. We usually place a queen excluder on during the main flow.

 

Super/honey boxes, what size should you go with? 

We often recommend using a smaller super box on top because when the honey comes in it can get very heavy. Large supers can weigh 80lbs.

 

Choosing frames

Frames are a personal decision for many beekeepers. Here is the run down of the different frames you can choose from and why. 

  • Standard wood frame with waxed sheets or plastic frames. Many beekeepers like the black for the brood because it’s easier to see larvae etc. While others may choose a natural for honey. If you are a beginner, doing this also helps separate what you were using the frames for based on the colours. You can also use wired wax foundation sheets or cut comb sheets.
  • If you are considering doing comb honey you may want to cut comb sheets and use as starter strips. The bees will complete making the comb from the top down.
  • Some people prefer plastic frames if they do a lot of extraction as they find them more durable. 

Spring feeding reminder: Use a 1:1 ratio of water and sugar. Spring feeding is to boost, not overfeed. Overfeeding can cause the bees to become honey locked with no empty cells for the queen to lay in. The goal is to create brood, which will be your new bees for the spring as the old, overwintered bees die off. 

We hope everyone is staying home and keeping healthy. We know the beekeeping season is underway in BC, and will arrive in Alberta soon. Although our Edmonton store is not open for regular visits, we are still here to help with all of your beekeeping needs and questions. You can arrange for front door pick-ups directly with Hank. You can still order nucs and hives. Shop online, email us at customerservice@hiveworld.ca or call 587-881-0244 anytime, we are open and here to help!

 




1 Response

Anna Kuchenbrand
Anna Kuchenbrand

May 14, 2020

Good Morning
We live outside of Lloydminster and thinking about getting into bees. What is the best place to put your hives? We have been reading many articles about what directions people recommend.
Thanks

Leave a comment

Comments will be approved before showing up.


Also in Education

How to Wrap Your Hives for The Winter?
How to Wrap Your Hives for The Winter?

November 24, 2022

Hives can benefit from being wrapped to make it easier for the bees to stay warm during the winter. As we have mentioned before in our previous blog, no one solution will fit everyone's needs. You as the beekeeper will need to analyze and customize your approach to winter prep depending on your region and climate. For most of Western and Northern Canada beekeepers benefit from wrapping and insulating their hives as the drops in temperature can be quite significant. The colder it is outside the hive, the more energy the colony will need to expand to keep itself warm. More energy means more food will be consumed, which can raise the possibility that there will not be enough food stores to last through the winter.

Continue Reading

How Much Ventilation is Required During the Winter?
How Much Ventilation is Required During the Winter?

October 21, 2022 1 Comment

There's no one size fits all when it comes down to overwintering your bees. Each location comes with its own microclimates that will determine what you need to consider when insulating your hive. Things like: Sunlight, Wind, Rain, etc.

Continue Reading

What Can I Use for Varroa Mite Treatment at The End of October?
What Can I Use for Varroa Mite Treatment at The End of October?

October 14, 2022

Oxalic Acid treatment. This is a very effective treatment for late fall and early spring. The reason is that during this time you will have almost no capped brood, which is the ideal time to use oxalic acid. The treatment is only effective on the bees and is unable to penetrate through the comb. It’s safe for the bees and is entirely natural. Oxalic acid is an organic compound that can be found in many vegetables, fruits, nuts, seeds, and other plants. It has been shown to be an effective treatment for Varroa Mite and approved to be used in Canada for many years.

Continue Reading